Drywall Installation and Finishing in Maxton, NC

Drywall Installation in Maxton, NC

Hung straight, taped, mudded and sanded smooth, ready for primer and paint, on new construction, additions and remodels.

Get A Free Quote Call (910) 964-1522

Drywall Is Where a Room Gets Its Shape

Once the framing is up and the rough-ins are done, drywall is what turns a skeleton of studs into rooms. It also decides how the finished space looks, because paint magnifies every ridge, seam and screw pop that was left behind. The best paint job in the world cannot hide drywall that was hung crooked or finished in a hurry.

Drywall installation has two halves. Hanging means fitting full sheets to ceilings and walls with the right fasteners and staggered seams. Finishing means taping the joints, covering the fasteners and corner bead, and applying several thin coats of joint compound, sanded between coats until the surface reads as one flat plane. Most of the quality is in the finishing.

Humidity is a real factor on drywall jobs here. Joint compound dries more slowly in damp weather, and rushing coats leads to cracks and bubbles later. We schedule the finishing stages around real drying time instead of the clock.

When You Need Drywall Installed

New framing for an addition, garage conversion or finished room is complete and passed inspection
A remodel has opened walls or ceilings down to the studs and needs them closed up
Old plaster or paneling is being replaced with new drywall
You are building out a space that needs fire-rated board or moisture-resistant board in specific areas
A ceiling must be rehung after insulation, wiring or roof work in the attic
You want a smooth wall finish instead of the heavy texture you have now

How We Install and Finish Drywall

Check the framingWe make sure studs and joists are flat and spaced correctly and that rough-in work is complete, because bowed framing shows through the finished wall.
Hang the ceilings, then the wallsCeilings go up first, then walls, with joints staggered and screws set to the right depth so the paper is not torn.
Tape and first coatSeams are taped, corner bead is installed and the first coat of compound covers tape, fasteners and bead.
Second and third coatsEach coat is wider and thinner than the last and allowed to dry fully before it is sanded smooth.
Texture and primeIf you want texture, it is applied now. Otherwise the walls are left smooth and ready for primer, which we can apply as well.

What Affects Drywall Pricing

Square footage and sheet countThe number of sheets and the amount of finishing drive most of the price.

Ceiling height and layoutHigh or vaulted ceilings need lifts or scaffolding, and many corners and openings add finishing time.

Finish levelA wall that will get a heavy texture needs less finishing than one that will get a flat, smooth coat or gloss paint, where every flaw shows.

Board typeStandard, moisture-resistant and fire-rated boards cost different amounts and are used in different locations.

Why Martinez Construction for Drywall

Drywall is one of the trades Jorge works in directly. He frames, hangs and finishes, so he knows what makes a wall flat before the first sheet goes up: straight studs, tight blocking, and joints that land where they should.

We can hang and finish for new additions, garage conversions and gut remodels, then hand the room off sanded and primed. If you want us to continue with paint, the same crew can do it.

Drywall Installation Around Maxton

We hang and finish drywall in Maxton and across Robeson County, with regular work in Lumberton. For larger jobs in Fayetteville or Raleigh, a call ahead helps us plan crew size and the number of days on site.

Drywall Installation and Finishing FAQs

How many coats of joint compound does drywall need?

Typically three: a first coat that embeds the tape, a second that fills and widens, and a third that feathers the edges flat. Each coat needs to dry before it is sanded. Skipping coats or rushing the drying is the most common cause of visible seams and cracks.

What is the difference between drywall hanging and finishing?

Hanging is fastening the sheets to the framing. Finishing is taping the seams and covering fasteners and corners so the wall looks like a single surface. Hanging goes fast and finishing takes the time, and most of what you see in the final wall comes from the finishing.

Do I need moisture-resistant drywall in the bathroom?

Moisture-resistant board is used on walls and ceilings in damp rooms, but it is not the right backing for tile in the shower itself, where cement board or a waterproof membrane system is used. We choose the right board for each location in the room.

Can you match my existing wall texture on an addition?

We can usually get very close with the common texture styles, such as orange peel and knockdown. It helps to see the existing wall in person, and we will do a test patch if the match is critical.

How long does drywall installation take?

Hanging a room takes a day or two. Finishing takes longer because of drying time between coats, and humid weather stretches that further. We give you a timeline when we quote the job.

Do you handle the dust?

Sanding joint compound is dusty. We seal off doorways with plastic where it makes sense, sweep and vacuum between stages, and ask you to cover or move sensitive items before sanding begins.